What you would see on a visit
Knitting machines, a sample room and a finishing line in the same building in Changping, Dongguan — with the QC steps that keep a re-order identical to the sample you approved.
Knitting, linking, washing, pressing — one building
A knitwear garment passes through several hands: the machine knits panels, a linker joins them, then washing and pressing set the final hand-feel. When those steps are in separate buildings, problems surface after the fact. Here they run in sequence on the same site, and a fault is caught at the step that caused it.
Equipment and work areas
Machine counts and daily output are quoted per project — ask for the current numbers when you request a quotation.
Five checks between yarn and carton
Quality is not a final gate here — each stage is checked before the next one starts, so nothing is discovered too late to fix.
-
Before knitting
Incoming yarn check
Yarn count, colour against the approved swatch, and lot consistency before a single panel is knitted.
-
Per style & colour
First-off approval
The first piece off the machine is measured against the approved spec sheet; production only continues once it passes.
-
During production
In-line inspection
Panels are checked for dropped stitches, oil marks and measurement drift while the order is running.
-
Every piece
100% final inspection
Every garment is inspected against AQL 2.5 criteria, with measurement checks per size before packing.
-
Before shipment
Packing & carton check
Carton marks, polybag and size ratio are verified against your packing list before the goods leave the factory.
Plan a visit
We are roughly an hour from Guangzhou Baiyun and Shenzhen Bao'an airports, and about 40 minutes from Shenzhen North station by car. Send your dates and we will arrange the floor walk, sample review and a look at yarn stock.
| Address | Room 801, No. 6 Bengjiang 1st Lane, Yuanshanbei, Changping Town, Dongguan, Guangdong, China |
|---|---|
| Tour format | On-site visit or live video walk-through |
| Best time | Weekday mornings, Guangdong time (UTC+8) |
Want to see the machines running your gauge? Let us book a time.
Tell us which gauge and yarn your style needs, and we will show that line on the tour.