A knitwear garment is a piece of yarn held together by structure. Change the yarn and you have changed the product — its weight on the shoulder, how it washes, how it ages, and whether the retail price still works. This is a working comparison from the yarns we knit most, with the trade-offs stated plainly.
The fibres we knit most
| Fibre | Hand & behaviour | Watch out for |
|---|---|---|
| Cotton | Crisp to soft depending on combing; holds shape; breathes well | Heavier than wool per warmth; can relax after washing if finishing is wrong |
| Merino | Fine, soft next to skin, good recovery, warm for its weight | Needs gentle care wording; pilling risk on loose gauges |
| Cashmere blend | Softness and loft at a fraction of pure cashmere cost | Blend ratio matters more than the label: 5% is a marketing number |
| Viscose | Drape, cool hand, takes colour deeply | Can stretch under its own weight; needs careful pressing |
| Acrylic | Colour-fast, machine-washable, stable cost | Warmth without breathability; pilling on low twist yarns |
| Recycled fibres | Recycled cotton and polyester blends for sustainability briefs | Shade variation between lots; confirm certification of content |
Blends are where the design work happens
Most commercial knitwear is a blend, and for good reasons. A merino–cashmere blend at a modest cashmere percentage gives the softness buyers feel in the hand while keeping the price near merino. A cotton–viscose blend adds drape to a knit dress that pure cotton would make stiff. An acrylic–wool blend lowers cost while keeping some of the warmth story.
The question to ask is never "does it contain cashmere?" but "at what percentage, and what does the rest of the blend do?" A 5% cashmere blend and a 30% one are different products that may share a label word.
Three things to confirm before bulk
1. Yarn count and ply
Two yarns of the same composition can knit completely differently. Count and ply belong in the tech pack, not in a conversation, because they decide the surface texture at a given gauge.
2. Colour approval on the actual yarn
Lab dips are done on the yarn you will knit, not on paper. Approve the dip and keep the reference — it becomes the standard for every re-order.
3. Care and content wording
Care instructions follow the fibre, and they are printed before anyone washes the garment. Agree the wording with the blend, not after: "hand wash cold" on a machine-washable acrylic is a needless restriction, and the reverse is a returns problem.
Ask for the blend ratio and the yarn count, not just the fibre name. Those two numbers describe the garment.
A practical way to choose
Start from the season and the retail price, not from the fibre. A trans-seasonal knit dress at a moderate price usually lands on cotton or a cotton–viscose blend. A winter sweater that must feel premium lands on merino, or a merino–cashmere blend if the price allows. Volume programmes with a fixed cost target land on acrylic blends or recycled polyester blends.
Then ask the factory for two swatches in the same gauge, one step apart in cost. Holding both in your hand settles the argument faster than any specification sheet.